Parametric wall mount

One hook for the headset, one pocket for the controller.

Measure the headband where it rests on the hook, and the controller if you want the pocket. The hook keeps the load rules that stop it snapping across the print layers, and the pocket sits above the hook so the band slips on and off.

Start with a mount preset

Headset and controllerThe wide hook with a pocket above itHeadset onlyThe wide hook on a short plate, no pocketWide controllerA deep pocket for a two-hand controllerCustomYour own headset and controller

Design file

Design name

A design file holds this product's settings in millimeters. It opens on any device.

Calculated result

Your mount

Ready to build

Outside: 90 × 45 × 150 mm
Hook opening: 15 mm between the plate and the lip, for a 10 mm band
Screw spacing: 2 on the center line, 125 mm apart
Load on the hook: 5 kg or more at 3 perimeters in PLA, approximate. This app rates nothing above 5 kg.
Load in the pocket: 5 kg or more at 3 perimeters in PLA, approximate. This app rates nothing above 5 kg.

Plate

The plate that goes against the wall. Two screws sit on its center line, one near the bottom and one near the top.

Plate width60–200 mm

Plate height60–250 mm

Plate thickness3–8 mm

Screw bore diameter3–6 mm

Hook

The wide hook the headband rests on. The root carries the load across the print layers, so the projection is at most 2.5 times the root and never over 60 mm. The opening between the plate and the lip must clear the band.

Hook width20–190 mm

Hook root8–24 mm

Hook projection12–60 mm

Hook lip height4–30 mm

Headband thickness4–40 mm

Pocket

An optional pocket above the hook. Measure the controller: the pocket width is its width plus your clearance, and the depth is its thickness plus your clearance.

Controller pocketA pocket above the hook, with a floor, two side walls, and a lip.

Pocket width40–190 mm

Pocket depth20–80 mm

Pocket lip height4–30 mm

Pocket floor4–10 mm

Construction

The plate corners and the curve detail.

Plate corner radius0–10 mm

Mesh quality

DraftStandardFine

Standard balances smooth fillets with quick regeneration.

Design checks passedThe current dimensions are safe to generate and export.

Wait for the current preview to finish generating. STL is unitless; import it as millimeters in your slicer.

Print the mount with the plate flat on the bed and the hook and the pocket pointing up. The hook arm, the pocket floor, and the pocket walls stand vertical, and the only faces that point down are the 45 degree ramps under the two lips.

Loading · Building your first preview…

Drag to orbit · Scroll to zoom · Right-drag to pan