Parametric well caddy

A well for every remote.

Measure each remote and each controller. Give every well its own width. The last well takes the width that is left, so the caddy is always full.

Start with a shelf preset

Three remotesThree equal wells on a wide shelfTwo controllersTwo deep wells for game controllersFive wellsFive narrow wells for a full shelfCustomYour own measured wells

Design file

Design name

A design file holds this product's settings in millimeters. It opens on any device.

Calculated result

Your caddy

Ready to build

Outside: 220 × 130 × 60 mm
Well widths (3): 70 × 70 × 72 mm
Base under wells: 15 mm
Front wall: 25 mm, 10 mm above the floor

Size

The outside of the caddy. Measure the shelf it stands on.

Caddy width80–400 mm

Caddy depth60–300 mm

Caddy height20–120 mm

Wells

One well per remote or controller. Measure the widest point of each item and add your own clearance.

Well widths25–300 mm

Well 1

Well 2

Well 3 solved

One width per well, front to back of the list, left to right in the caddy. The last well takes the width that is left inside the caddy, so its own value is only a starting point.

Well depth10–110 mm

Front wall height5–120 mm

Construction

The walls, the base, the dividers, and the corners.

Outer wall thickness1.2–4 mm

Base thickness1.2–6 mm

Divider thickness1.2–4 mm

Outer corner radius0–20 mm

Mesh quality

DraftStandardFine

Standard balances smooth corners with quick regeneration.

Design checks passedThe current dimensions are safe to generate and export.

Wait for the current preview to finish generating. STL is unitless; import it as millimeters in your slicer.

Loading · Building your first preview…

Drag to orbit · Scroll to zoom · Right-drag to pan