Parametric revolved pot

A pot sized for the shelf and the plant.

Set the base diameter, the height, and the wall angle. Set the drainage holes. The pot prints upright and needs no supports. The calculated result names the saucer that matches this pot.

Start with a pot size

Seedling pot, 90 mm baseA short pot with three 4 mm holesDesk pot, 120 mm baseThe default pot with four 6 mm holesDeep pot, 150 mm baseA tall pot with six 6 mm holesCustomYour own measured space

Design file

Design name

A design file holds this product's settings in millimeters. It opens on any device.

Calculated result

Your pot

Ready to build

Widest diameter: 147.1 mm
Inside depth: 127 mm
Matching saucer floor: 122 mm
Drainage: 4 holes of 6 mm on a 58.1 mm circle
Rolled rim: 1 mm

Size

The base sits on the saucer. The wall opens upward, so the rim is wider than the base.

Outside diameter at the base50–200 mm

Pot height40–220 mm

Wall angle from vertical0–45

Rolled rim radius0–3 mm

Drainage

The holes go through the flat base only. They never cut the wall. Each hole bridges its own diameter, so the range stops at 8 mm.

Drainage holes1–8

Drainage hole diameter4–8 mm

Construction

The wall, the base, and the mesh.

Wall thickness1.6–4 mm

Base thickness1.6–6 mm

Mesh quality

DraftStandardFine

Standard gives 96 segments around the pot.

Design checks passedThe current dimensions are safe to generate and export.

Wait for the current preview to finish generating. STL is unitless; import it as millimeters in your slicer.

Loading · Building your first preview…

Drag to orbit · Scroll to zoom · Right-drag to pan